INCREASE YOUR KNOWLEDGE ON RELAY CONTROL USB

Relay Control USB allows computer-controlled switching using the USB port of your computer.

The Isolated USB port isolates the host computer from the relay boards, providing a better EMI/RFI protection and better Ground Loop handling. It controls one or more relays by sending commands to the board via the USB connection that will mount as a Virtual COM Port on a PC. USB Relays offer excellent communication, speed, and reliability through any available COM port at any standard rate.

FEATURES OF USB RELAYS:

●     Simple implementation

○     Interface mounts as the virtual COM port

○     Compatible with any operating system

●     Industry Leading Command Set

○     Send Specific Commands to Trigger Relays

○     Trigger Any or All Relays

○     Program in any Language

●     Wide Range Of Option

○     1,2,4,8,16 USB Relays Controller

○     24,32,64 Channel USB Relays Module

○     USB Relay Module With Analog Inputs

○     USB Relay Controller With GPIO Digital I/O

●     Base Station Software

○     Point & Click Interface

○     Read Sensor Levels

○     Read Status of Relays

○     Manually Trigger Relays  

VARIETIES OF USB RELAY CONTROLLERS:

USB Relays are available with SPDT 5, 10, and 20 amp, SPST 30 amp, and DPDT 1, 3 & 5 amp relays installed. Each section is broken down by the number of relays installed on the board. USB Relays are available with up to 32 relays onboard, but they can be expanded up to 256 total relays.

●     USB RELAY - CHANNEL 1

●     USB CONTROLLER BOARD - 2 - CHANNEL

●     USB CONTROLLER RELAY - 4 - CHANNEL

●     USB RELAY SWITCH - 8 - CHANNEL

●     USB RELAY - 16 - CHANNEL

●     USB RELAY CONTROLLER - 24 - CHANNEL

●     USB RELAY CONTROLLED - 32 - CHANNEL

Online-Devices is a professional, high technology online provider offering high-quality industrial communication products and electronic equipment made by leading manufacturers around the globe, such as Advantech automation, Superior-Solution, and Intelligent Appliance. To know more information, visit https://www.online-devices.com/.

QUICK GUIDE TO RELAY CONTROL SOFTWARE AND SOLID-STATE RELAYS

Ethernet Controlled Relay

Relay Control Software is a programmable timer software to control the relay board and is designed to work with the IP relay device. It allows you to configure switches to control relays and read the status of those relays without programming. It helps the application in turning any relay from any relay board like a solid-state relay board when you want and in the way you like.

The relaycontrol software works in two modes. At the point when current moves through the electromagnetic curl, it allures a magnetic substance that shuts the switch and the other way around when there is no current moving through the loop. The relay will not go into an intermediate stage between on and off. Electronic circuits might be coupled into relays to make them work consequently. The exchanging system will be pre-modified in a channel as indicated by the necessity of a particular application.

While electromechanical relays (EMRs) have their place, solid-state relay boards are often preferred due to their small size, lower cost, high speed, low electrical, and reliability. The Solid-State output ensures endless operation, power efficiency, and excellent environment, shock, and vibration resistance. It is capable of handling both Positive and Negative Logic Input signals, while the input pull-ups might be switched to either a Positive or GND supply line, to best fit the attached devices.

One of the professional, high technology online suppliers, is Online-Devices. We spend significant time in offering high-quality electronic hardware made by driving makers around the world, for example, Advantech automation, Superior-Solution, and Intelligent Appliance at an altogether low cost. We also provide help to various ventures from small amounts to very large quantities and emphasize flexibility and keep an open mind to special requests.